top of page
  • mcfixit86

Won't Start? No Start No Crank Intermittent starting problem solved! Dodge Caravan Town and Country

This no start, no crank intermittent start had me puzzled for days. All dash lights worked, no check engine codes, the battery was good, and the starter worked fine. Sometimes it would take up to 20-30 turnovers before it would fire up as nothing happened. I feel like I did everything to get it fixed (battery, starter, alternator, ground cables, voltage drop, checked all fuses and relays, ignition switch, ignition key cylinder, ignition actuator, etc). Then I figured it out. Check out the video for my fix!

• Philips Screwdriver -

• 220 grit sandpaper -

• 10mm socket - battery - basic set:

• 13mm socket - batter nut latch - basic set:

• Ratchet - basic set:

• 6in extension to get to battery nut latch -

• Pick (optional) -

• Magnetic Metal Tray -

• Multimeter (optional) - check fuses -

00:00 Intro

00:15 The Problem

01:03 The Fix

03:15 ​TOOLS

15:05 Test to make sure it worked

This video should work on Dodge Caravan and Chrysler Town and Country for Generation 4 for the years of 2001, 2002, 2003, 2004, 2005, 2006, 2007. It should be very similar for years before and after this.

Disclaimer: Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.


bottom of page