Bambu Lab X1 Carbon Series Combo Set UP

Bambu Lab X1 Carbon Combo - Can it be set up and print in 15 mins?

The Bambu Labs X1 Carbon Combo offers a variety of advanced features including built-in camera monitoring, dual auto bed leveling and multi-color/material printing capabilities.

Key Features:

Prints material up to 300°C

256 x 256 x 256mm build volume

AI inspected first layer

Up to 16 multi-color printing

Tool: 

- Bambu Lab X1 Carbon - www.bambulab.com 

- PLA+ - https://amzn.to/3zIEyde 

Chapters:

00:00 Intro

00:33 Unboxing

01:27 Remove Plastic Bag & Tape From Font Door

02:24 Remove Tools & Accessories Box

03:39 Remove 2 Hex Screws

03:52 Remove AMS from Printer

04:15 Remove 4 Hex Screws

04:25 Remove Tray

04:38 Remove Foam & Cardboard

05:20 Remove Packaging From Glass Top

05:36 Place AMS on Top

06:02 Insert PTEF Tub

06:12 Find Cables: 4 Pin & 6 Pin

06:25 Plugin 6 Pin Cable

06:54 Loope 6 Pin Cable 

07:08 Attache Spool Holder (optional)

08:38 Remove 3 Hex Screws

09:00 Flex Printed Circuit & Screen Install

09:44 Plug in Pinter

10:21 Install Bambu Handy Labs

10:56 Set Up Network

11:19 Scan QR Code to Bind Printer

11:52 Agree to Terms

12:28 Calibrate Printer (not including this time - 16:31)

14:44 Remove Foam Under Print Bed

14:54 Set Up AMS

15:11 Remove Stickers & Unpackage Desiccant Packets

16:06 Install Filament Into AMS 

17:05 Firmware Update (not including this time - 20:00)

19:50 Start Print File

22:06 Print Complete

22:51 Timelapse

23:28 Clean Bed

23:52 A Print Using AMS - 2nd Print On Device

24:18 How Long It Took to Set Up, Calibrate, & Install Firmware

25:01 Final Thoughts & Review of the Product

Check out my website at http://mcfixit.us  

Disclaimer:

Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.

#mcfixit #bambulabs #x1c

——

Supplies used to record this video: 

* GoPro Hero 7 Black - https://amzn.to/3f3ALtb  

* 256GB Flash Drive - https://amzn.to/33pAueG  

* Vlogging Frame - https://amzn.to/33tajE0  

* GoPro Pro 3.5mm Mic Adapter - https://amzn.to/2RCURCu  

* Youmic Lavalier Lapel Mic - https://amzn.to/2R55sWX  

* Boom Stand (tripod) - https://amzn.to/3bdkQaw 

* 5/8” to 1/4” adapter (boom to blogging frame- https://amzn.to/3txrVsM  

* Portable Battery Powerbank- https://amzn.to/3vJQc0q  

* 6ft USB to USB-C (powerbank to GoPro)- https://amzn.to/3uAS5MH